The multi-projection welding machine applies synchronized electrical current and mechanical pressure across multiple contact points simultaneously within a single operational cycle. This specialized resistance welding system concentrates thermal energy precisely onto pre-formed embossments, weld nuts, or raised profile locations on metal stamped components. By localizing high electrical resistance at the projection sites and following up with controlled forging force, the equipment forms consistent multiple weld nuggets simultaneously. This methodology minimizes thermal distortion, eliminates secondary repositioning steps, and ensures high structural rigidity for complex multi-point sheet metal assemblies across demanding industrial applications.
The upper platen aligns multiple electrodes or partitioned contact blocks with pre-formed projections on the workpiece. Upon mechanical clamping, synchronized secondary current flows through every contact point in parallel. The localized high electrical resistance at each projection melts the material instantly, and subsequent forging pressure consolidates the multiple joints into a single uniform assembly.
Synchronized Multi-Point Firing: Independent or parallel transformer secondary circuits distribute balanced electrical current to eliminate current shunting variations across multiple contact locations.
Four-Column Rigid Gantry Structure: Heavy-duty mechanical framework minimizes structural deflection and angular displacement under high clamping loads.
Multi-actuator or articulated upper holders compensate for minor workpiece thickness tolerances to maintain equal pressure distribution at every projection.
Multi-Stage Programmable Sequencing: Closed-loop microprocessor controllers regulate squeeze time, pre-weld slope, weld duration, hold time, and forging pressure profiles.
Precision-machined sub-plates and T-slot lower die bases enable rapid fixture alignment and reduced changeover downtime.
Simultaneous welding of multiple weld nuts, threaded studs, and reinforcement plates onto high-strength steel automotive stampings.
Multi-point projection assembly of internal metal frames, refrigerator structural panels, and stove reinforcement brackets.
Simultaneous batch joining of multi-contact copper terminals, silver electrical contacts, and power distribution busbars.
|
|
|
|
|
|
|
150 – 300 |
||
|
|
380V / 415V, 50Hz / 60Hz |
||
|
|
15 – 50 |
||
|
|
500 – 800 |
||
|
|
100 – 250 |
||
|
|
2 – 8 simultaneous points |
Multi-channel scaling |
|
|
|
Microprocessor PLC + Touch HMI |
Closed-loop current monitoring |
|
|
|
15 – 30 |
Custom-machined copper alloy lower dies and multi-tip upper holders engineered to exact component geometries and projection layouts.
Pneumatic part locator pins, rapid mechanical toggle clamps, and error-proofing optical sensors.
Manual loading shuttle tables, sliding guide rails, or robotic pick-and-place integration interfaces.
Multi-channel current sensors, proportional pressure valves, displacement transducers, and quality data logging modules.
Engineering review of customer part drawings, material specifications, and projection layout tolerances.
Physical sample testing using customer-supplied metal sheets to verify nugget diameter, tensile strength, and absence of surface burn-through.
Micro-section analysis, shear testing, and peel testing conducted to confirm weld integrity against industrial standards.
Pre-Shipment Calibration Report: Final verification including electrical insulation checks, pressure calibration curves, and operational cycle testing.
A: The machine utilizes isolated secondary transformer circuits or balanced current distribution paths to ensure equal energy delivery across all contact points, preventing preferential current flow through lower-resistance joints.
Q: What sheet metal thickness ranges are suitable for multi-projection welding?
A: It accommodates stamped sheet components ranging from 0.5 mm to 4.0 mm, provided projection dimensions comply with standard resistance welding design ratios.
A: Yes. The modular upper platen and lower die base allow individual fixture inserts to be replaced without modifying the core press frame.
A: The controller records real-time welding current, applied force, and cycle duration for every weld, with export options for factory data networks.
A: The installation site requires a stable three-phase industrial power feed, a compressed air supply of 0.5 to 0.7 MPa, and a closed-loop industrial water cooling system.
Populiarus Žymos: multi-projection welding machine, China multi-projection welding machine manufacturers, suppliers, factory

